Let’s Bring It Home

I finished the center section of the floor with the proper dimensions based off of the wheel wells.

I decided to go with two layers of 2" polystyrene for insulation under the floor. Once the insulation was installed, it was time to reinstall the belly wrap and the belly pan.

Next thing I knew, it was time to bring her home to continue with the inside work! I cannot tell you how happy I was at this moment!

When it promptly down poured as I urgently needed to unhook and get to the airport for work!

So that's where it stands. Next up is to start documenting what remains of the wiring, planning out the wiring for future solar, and begin with the insulation and re-installation of the interior walls.